SH225-M

The SH225-M is the first shear mode transducer provided for acoustic emission researchers, interested in studying the role of shear waves in acoustic emission testing. The shear waves play an important role in acoustic emission testing of structures constructed from plates.
More info →

SE9125-M

The SE9125-M is a dual-purpose acoustic emission transducer that is equally sensitive to in-plane (IP) and out-of-plane (OOP) plate waves. This dual performance is achieved by a partial mass loading of the piezoelectric crystal which is the sensing element for this sensor.
More info →

SE900-MWB

The SE900-MWB is a broadband acoustic emission sensor, which provides high reliability at an economical price. It features 100 to 900kHz frequency response and is delivered with traceable individual calibration curve.
More info →

SE650-P

The SE650-P is a high frequency miniature transducer with a 0.125 inch aperture. It has its peak frequency response At approximately 650 kHz. The inside of the case is filled with a proprietary backing material that provides protection from shock, vibration and moisture intrusion.
More info →

SE55-R

The SE55-R is a low frequency, high sensitivity transducer well suited for above ground storage tank inspection, testing of concrete structures, and acoustic emission testing of other attenuating materials. Use of the transducer in the transmit-receive mode makes it an ideal candidate for acousto-ultrasonic testing of attenuating materials.
More info →

SE40-Q

SH40-Q is a sensitive low frequency sensor. It is well suited for detecting leaks and the testing materials exhibiting high attenuation to acoustic emission signals. It has sensitivity at approximately 1 volt per nanometer of displacement at 40kHz frequency.
More info →

SE375-M

The SE375-M is a high frequency transducer with its peak sensitivity at 375 kHz. It is ideally suited for detecting in-plane waves due to crack growth in noisy environments.
More info →

SE2MEG-P

The SE2MEG-P is a broadband miniature transducer that has high sensitivity out to 2 MHz.
More info →

SE25-P

The SE25-P is a miniature transducer with a small aperture (0.125 in.). The element of this transducer has been loaded to provide low frequency displacement response to plate waves produced by out-of-plane sources such as impact and friction in addition to its high frequency response to in-plane sources due to crack growth.
More info →

SE150-M

The SE150-M design has been proved very popular over the years for conducting field tests on pressure vessels, piping and other structures.
More info →

SE1000-H

The SE 1000-H is a small aperture, high fidelity acoustic emission transducer with frequency range of 8kHz to 400kHz. The small 1.5 mm aperture, high sensitivity, and high fidelity features, provide an ideal solution for researchers interested in the study of frequency characteristics of plate waves.
More info →

PICO-Z

The PICO-Z is a very small acoustic emission sensor designed for use on small specimens or for disk media burnish and glide tests and head-disk interference (HDI) detection studies. It has 650kHz peak detection sensitivity and lack of low frequency response.
More info →

DE-1000-R

DE-1000 is a true differential wideband sensor.
More info →

DE-1000-M

DE-1000 is a true differential wideband sensor.
More info →